What causes the LG IE error?

Supply valves behind the washer are not fully open; Kinked supply hoses; Clogged inlet valve screens (mesh filter at the hose connection points); Failed water inlet valve solenoid; Low home water pressure (below 20 PSI).

How can I troubleshoot LG IE myself?

Verify both hot and cold supply valves behind the washer are fully open (turned counterclockwise as far as they go). Check for kinks in the supply hoses. Turn off the supply valves, disconnect the hoses, and inspect the small mesh screens inside the inlet valve ports — clean any sediment with a toothbrush. Reconnect and test.

When should I call a professional for LG IE?

If supply pressure and screens are fine, the inlet valve solenoid itself has failed and needs replacement. Also call if you notice water leaking from the valve body — that's a separate failure mode.

LG · Washer IE DIY First

LG Washer IE — Inlet Water Error

The washer fills very slowly, or barely fills at all, and then the cycle stops.

Stylised cutaway illustration of a washing machine; individual parts are not labelled

What does LG IE mean?

The washer did not fill to the required level within the allotted time. The control board expects a certain water level within about 4 minutes of the fill valve opening.

What causes LG IE?

Supply valves behind the washer are not fully open
Kinked supply hoses
Clogged inlet valve screens (mesh filter at the hose connection points)
Failed water inlet valve solenoid
Low home water pressure (below 20 PSI)

How to fix LG IE yourself

1 Verify both hot and cold supply valves behind the washer are fully open (turned counterclockwise as far as they go).
2 Check for kinks in the supply hoses.
3 Turn off the supply valves, disconnect the hoses, and inspect the small mesh screens inside the inlet valve ports — clean any sediment with a toothbrush.
4 Reconnect and test.

← Back to Error Code Database

What does LG IE mean?

What causes LG IE?

How to fix LG IE yourself

Related Error Codes